EFS ICT series magnetic induction conductivity transmitter, also known as a salinity meter, is suitable for harsh chemical application environments. It is made of chemically corrosion-resistant materials, and the electrode will not be polarized, which can avoid the adverse effects of dirt, grime, and even scaling layer coverage. It is easy to install and has a wide range of applications The electrode design is suitable for environments with strong acids such as fuming sulfuric acid.
Inductive conductivity technology completely eliminates the problems and errors of blockage or planning in bipolar or multipole conductivity, making it applicable to all areas that may cause blockage.
Wide measurement range (1 μ S/cm -2S/cm), analog output or RS485 communication, and can be calibrated, with an extraordinary service life.
Measurement range (conductivity):
0 ~ 20 ms/cm; 0 ~ 100 ms/cm
0 ~ 200 ms/cm; 0 ~ 500 ms/cm
0 ~ 1000 ms/cm; 0 ~ 2000 ms/cm
Can measure various acid concentrations (%)
Hydrochloric acid (HCL): 0-20%;
Hydrochloric acid (HCL): 25-40%;
Nitric acid (HNO3): 0-25%;
Sulfuric acid (H2SO4): 0-25%;
Sulfuric acid (H2SO4): 35-85%;
Sulfuric acid (H2SO4): 92-100%;
Can measure various alkali concentrations (%)
Caustic soda (NaOH): 0-18%;
Caustic soda (NaOH): 20-40%
*Other acidity and alkalinity not listed, can be specified for recording sea water salinity: 0-72pt
TDS: 0-500000mg/L
Temperature compensation component: PT1000 Measurement accuracy: 1%
Salinity accuracy: ± 1%, resolution 0.01ppt, response time: 98% response within 3 seconds
Input voltage:
24VDC (for analog communication output)
12VDC (when MODBUS RS485 output)
Output communication (choose one of the two):
Analog 4-20mA configuration: only corresponds to conductivity or salinity (choose one of the two); The temperature compensation PT1000 of the ribbon needs to be separately connected for measurement conversion.
MODBUS RS485 configuration: Simultaneously output parameters such as conductivity, salinity, temperature, calibration parameters, etc.
Body material:
PPH polypropylene
PFA (Sanitary Clamp Connection)
Process connection ruler: NPT 1 1/2 "and 3/4" external thread
Cable connection method: One piece cable, standard 5-meter (customizable)
IP65 quick plug connector type; Installation method: online, flow pool or injection installation
Working temperature:
0-70 ℃ (PPH body)
0-160 ℃ (PFA body)
+86 135-9027-6985
E-mail